Engineering Design: Project 2.4.1 - Design Project

1) I worked with Emmet G. and we made a candy dispenser. We thought of many different ideas before coming up with this one. At first we were just taking ideas from other people but then we just decided to but our minds together and come up with our own. It didn’t take us to long before we came up with the right model and it turned out to be a very good one.

2) We chose it because it was sleek, safe, and easy to use.

3) Step #1
     We needed to find a device that is workable.
     Step #2
     We had to brain storm and write out a design that we think will work.
     Step #4
     It needed to be durable and fit a 8x4x4 measurment. There was a unique candy stile and shape that        
     needed to be used or else it would have gotten jammed or stuck.

4)

There is a slope inside of it to help the candy move down to the bottom. There is also an opening on top so you can refill it. There is a crank at the end of it so that you can control the amount of candy coming out.